New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Santa Clarita pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Panorama City, CA | Juniper Windows Santa Clarita
CGI window and door service in Panorama City is what our crew does week in and week out, and we do it as an independent provider, not a manufacturer affiliate. A quick answer for anyone searching right now: yes, we repair and service CGI’s aluminum and impact-rated lines across Panorama City, and most hardware fixes like rollers, weatherstripping, and lock adjustments run between $145 and $395. The detail that changes everything here is the stucco. Original 1950s Panorama City homes have exterior stucco returns that sit tight over the window frame, sometimes leaving only a quarter-inch reveal, so a sloppy insert pull can chip the wall before the job even starts. We know that going in. Call (661) 523-0347 for a free estimate on any CGI unit you’ve got.
Why Panorama City Residents Choose Us for CGI Service
We’ve worked on hundreds of CGI units across the San Fernando Valley, so we recognize the specific ways these windows and doors age under Panorama City’s dry heat and fine dust. Sean Mackey, our owner, cut his teeth at Los Angeles Trade-Technical College and has spent roughly two decades learning windows from rough-in to finish trim. When a vinyl pocket replacement turns ugly or a Therma-Tru threshold needs to be shimmed dead-plumb on an out-of-square opening, Sean’s the one other installers call. That same eye for detail carries into our CGI sales & service work. We stock OEM roller assemblies for the 1900 Series and multi-point strike plates for the 3800 Series through regional distributors, so a Panorama City homeowner isn’t waiting a week for a part that should be on the truck. Every tech arrives background-checked and uniformed, the price is in writing before we touch anything, and our 365-Day Done Right Promise covers parts and labor for a full year.
Common CGI Windows & Doors Problems We Solve in Panorama City
- Hardened, cracked wool pile weatherstripping. CGI non-impact single-hung windows in 1950s and 1960s Panorama City tract homes have wool pile that bakes in the Valley sun until it turns brittle. Once it cracks, fine dust from those dry summer months sneaks in, and the sash rattles every time the wind picks up. We replace the pile with the correct height and density for the frame, not a generic strip.
- Misaligned interlocking meeting rails on horizontal rollers. Decades of thermal cycling in Panorama City’s 90°F-plus summers and mild, wet winters cause the meeting rails on older CGI horizontal roller windows to shift. The panels won’t fully close or latch, which leaves an air gap right at eye level. We realign the rails and adjust the strike, no full replacement needed.
- Binding multi-point locks on 3800 Series doors. CGI 3800 Series multi-point locks with surface-mounted roller assemblies sometimes seize when dust from the dry Valley air mixes with old lithium grease. Instead of quoting a whole new mechanism, our techs flush the old grease and relube with a dry-film lubricant that won’t gum up again.
- UV-degraded gaskets on west-facing Estate Collection units. Panorama City homes with west-facing CGI Estate Collection windows and no awnings or overhangs see intense afternoon sun, which breaks down gaskets and sealant. When the first heavy winter rains arrive, moisture works its way in. We replace glazing channels and reseal before the leaks start.
- Sagging panels from worn steel rollers. This is the classic Panorama City sliding window failure. The original steel rollers grind a groove into the aluminum track, the panel drops, and a visible gap opens at the meeting stile. We swap in a nylon-tired OEM assembly, file any burr in the track, and add fresh fin-seal weatherstrip.
CGI Service in Panorama City: What Local Conditions Mean for Your Equipment
Homes on Cantara Street and Chase Street, two of Panorama City’s original 1950s tracts, commonly have exterior stucco returns that project over the CGI frames with only a quarter-inch reveal. That sounds like a small detail until you try to pull an insert replacement. A contractor who doesn’t know these streets will yank the old frame, the stucco edge cracks and crumbles, and suddenly you’re paying for a stucco patch on top of the window work. Our techs shave the stucco edge back first, expose the mounting fin, and pull the unit clean. That one step saves a mess and keeps the exterior looking like it did before. We can also tell you whether a west-facing CGI unit on a ranch-style home without overhangs would benefit from a low-E glass upgrade, because we’ve measured the heat gain on those exact exposures.
On Chase Street near the Panorama Mall, our tech serviced a CGI 1900 Series horizontal roller window where the bottom track had worn a groove from the original steel roller. The panel had sagged enough to leave a 1/8-inch air gap at the meeting stile. We replaced the steel rollers with a nylon-tired OEM assembly, filed the track burr, and installed new fin-seal weatherstrip. Afterward the sash glided with finger pressure and the homeowner’s portable AC unit stopped running nonstop. A window that leaks air is just an expensive hole in your wall – let’s do it right the first time.
CGI Models & Products We Service in Panorama City
We service the full CGI line, including the 1900 Series non-impact architectural aluminum, the 3800 Series impact-rated commercial-grade, the Estate Collection wood-clad impact-resistant, and the Sentinel Series impact-rated vinyl. For out-of-production glass packages, we source exact-thickness laminated or annealed IGUs from local commercial glass fabricators. For hardware, we use CGI’s current OEM roller assemblies and multi-point strike plates when regional distributors still stock them. For hinges and gaskets where the original is discontinued, we offer premium aftermarket equivalents only if you want a lower-cost fix, and we tell you upfront which is which. We never recommend a full window replacement for a CGI unit that just needs a roller, weatherstripping, or a balance cassette.
CGI Service Pricing in Panorama City
Here’s what we charge for common CGI service work in Panorama City, in writing:
- Roller replacement (pair, nylon-tired OEM): $145 – $260
- Weatherstripping replacement (wool pile or fin-seal, per window): $95 – $185
- Meeting rail realignment and latch adjustment: $120 – $220
- Multi-point lock flush, relube, and strike adjustment: $160 – $310
- Glazing channel and gasket replacement (Estate Collection): $185 – $375
- Full service call with diagnosis (waived with repair): $89
What drives the final number is the specific CGI model, how many panels need work, and whether the stucco return has to be shaved back for access. Every free estimate includes the exact price in writing before we start, so there’s no change order surprise. Call (661) 523-0347 and we’ll give you a real number, not a vague range.
Serving Panorama City, CA - Our Local Coverage Area
We’re based in the Panorama City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Panorama City
Yes. The failed sealed unit comes out, we measure the existing IGU thickness, and order an exact replacement from a local commercial glass fabricator. The aluminum frame stays. This works for most CGI horizontal sliders in Panorama City’s ranch homes as long as the frame itself is still square and the track isn’t compromised. We’ll assess it during a free estimate.
The original steel rollers have likely worn a groove into the bottom track, or dust mixed with old grease has hardened into a paste. Panorama City’s dry summers accelerate both. We replace the rollers with nylon-tired OEM assemblies, file the track smooth, and relube with a dry-film product that won’t attract grit. The fix usually takes under an hour.
Yes, and low-E glass makes a measurable difference in a home that faces west with no overhang. Panorama City’s summers frequently push past 90°F, and those original single-pane CGI units let a lot of that heat through. Replacing the glass package with a dual-pane low-E IGU cuts solar heat gain noticeably. Film helps less than new low-E glass, but it’s cheaper. We’ll quote both options so you can decide with real numbers.
You can, and the 3800 Series or Sentinel Series are the usual candidates for our Window Replacement in Panorama City. The key is whether the existing stucco reveal is deep enough to accept the impact-rated frame depth. On many Cantara Street and Chase Street homes, the quarter-inch reveal means the stucco edge has to be shaved back slightly to seat the new frame. We do that carefully, then re-caulk with a color-matched sealant so the exterior reads original.
We repair them first. The multi-point locks on CGI French doors are mechanically simple once you understand the linkage, and most failures come from dust binding or a shifted strike plate, both of which we fix without replacing the mechanism. If the lock body itself has failed and CGI no longer stocks it, we’ll source a premium aftermarket equivalent. A full replacement is the last resort, never the first quote.
Service Areas Near Panorama City
We run CGI service calls across the San Fernando Valley and north into the Santa Clarita Valley. That includes Panorama City service area work, plus CGI service in Santa Clarita, CGI service in Porter Ranch, San Fernando, and Mission Hills. If you’re within a half-hour of Panorama City, chances are we can get to you.
Book Your CGI Service in Panorama City Today
Call (661) 523-0347 and a live person answers, day or night. We’ll schedule your free estimate, put the price in writing, and send a tech who knows Panorama City’s housing stock and your specific CGI unit. You’ll get a live arrival time and before-and-after photos. No voicemail maze, no phone tag.
Written by Sean Mackey, Owner at Juniper Windows Santa Clarita, serving Panorama City and the San Fernando Valley since 2001.
Six Reasons Homeowners Choose Juniper Windows Santa Clarita
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.