VLX 500 Sliding Window

VLX 500 Sliding Window in Santa Clarita, CA | Juniper Windows Santa Clarita

The VLX 500 Sliding Window is a high-performance aluminum system built for homeowners who want wide, uninterrupted views and a window that glides open with almost no effort. In Santa Clarita, where summer heat and Santa Ana winds test every opening in a house, this window holds up. Juniper Windows Santa Clarita is an authorized ViewLux installation partner, which means we install the VLX 500 to factory spec, protect the warranty, and stand behind the work long after the job is done. If you’re pricing a sliding window project, call (661) 523-0347 for a free, written estimate.

Call (661) 523-0347

Product Overview – VLX 500 Sliding Window

The VLX 500 is ViewLux’s high-performance aluminum sliding system, and the design intent is straightforward: a slim frame profile that lets the glass do the talking. The visible profile measures just 1.97 inches wide, which is noticeably narrower than typical vinyl or older aluminum frames. That slim profile translates to more glass area per opening. In a living room facing the hills off McBean Parkway or a bedroom overlooking Plum Canyon, the difference is real. You see more of what’s outside and less metal.

The aluminum extrusion has a wall thickness of 0.079 inches, which gives the frame structural rigidity without making it bulky or heavy-feeling. Buyers choose this series for three reasons: the sightlines, the durability, and the smoothness of operation. The sashes ride on engineered rollers that make a two-panel or three-panel slider feel light on the track, even on large openings. It’s available in both 2-track and 3-track configurations, so it works as a simple patio slider or as a multi-panel wall of glass.

For Santa Clarita homes, the aluminum frame is a practical choice. It resists warping in dry heat, doesn’t soften like vinyl on a 105-degree afternoon, and holds its alignment over years of daily use. We’ve installed the VLX 500 in tracts around Valencia, Stevenson Ranch, and Newhall, and it’s a product we recommend confidently because it fits the climate and the architecture of this valley.

Technical Specifications

• Frame material: Extruded aluminum, 0.079″ wall thickness
• Visible profile width: 1.97″
• Track configurations: 2-Track (two-panel slider) or 3-Track (three-panel, more glass, wider opening)
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Retractable Screen or Sliding Screen
• Thermal performance: Thermal break technology, NFRC-rated energy performance values available per glazing package
• Installation standard: AAMA 2400/2410 compliant installation, AAMA 812 low-expansion foam sealant on all perimeter joints
• Performance ratings: Airtightness, water penetration resistance, and sound control ratings verified per AAMA testing standards

Performance Features

Thermal Efficiency – The VLX 500 frame is built with a thermal break that separates the interior and exterior aluminum surfaces, cutting heat transfer through the metal. Pair it with Low-E glass and the NFRC-rated package delivers measurable cooling-cost savings through Santa Clarita’s long summer months.

Acoustic Performance – Sliding windows are often the weak point for street noise. The VLX 500’s frame tolerances, weather stripping, and glazing options combine to reduce sound transfer. Homes near Bouquet Canyon Road, Sierra Highway, or the 14 freeway benefit most from laminated glass upgrades.

Airtightness & Weather Seal – The interlocking sashes use compression gaskets that seat tightly when closed. Combined with AAMA 812 low-expansion foam sealant installed on every perimeter joint during installation, the assembly blocks drafts and airborne dust that blow in with canyon winds.

Waterproofing – The frame’s sill design channels water outward with a sloped track and weep system. During installation we verify drainage and run a water test before finishing the interior trim. This matters in Santa Clarita, where sudden winter downpours hit hard-packed soil and run off fast.

Wind Resistance – Santa Ana winds regularly gust above 50 mph in canyons and ridgeline neighborhoods like Tesoro del Valle and Sand Canyon. The VLX 500 is wind-load rated for local climate requirements, and the 0.079-inch wall thickness on the extrusions resists flexing under pressure.

Security & Hardware – The sliding sash carries multi-point locking hardware that engages at the meeting rail, not just a flimsy latch at the center. Tempered and laminated glass options add impact resistance, which also meets safety-glazing code requirements for large openings and door-adjacent windows.

Color & Glass Options

The VLX 500 comes in six finishes. Premium Black and Pure White are the two most specified colors in Santa Clarita right now, with black frames dominating modern farmhouse and contemporary builds across Valencia and Castaic. Anodized Silver reads more commercial or mid-century in look, while Bronze and Champagne work beautifully on homes with warmer stucco tones or tile roofs. Teak Wood offers a warm wood-look finish without the maintenance of actual wood.

On the glass side, Clear is the budget baseline and fine for temperate exposures. Frosted glass gives privacy for bathrooms or street-facing bedrooms without losing light. Low-E is the upgrade we most often recommend in Santa Clarita: it reflects radiant heat during summer and reduces UV fading on furniture and flooring. Tempered glass is safety-rated and required by code in many locations. Laminated glass adds impact resistance and the best sound control available in this series.

Installation by Juniper Windows Santa Clarita in Santa Clarita

A window is only as good as the hole it goes into. We’ve pulled units out of Santa Clarita homes where the window itself was fine but the installation had failed: gaps around the frame, no slope on the sill pan, sealant that had dried and cracked. A bad install leaks, drafts, and voids the manufacturer warranty. The VLX 500 is a precision product and it deserves a precision installation.

Juniper Windows Santa Clarita installs every VLX 500 to the AAMA 2400 and 2410 installation standards, which are the recognized benchmarks for window installation in the U.S. The process starts with a pre-install inspection of the opening, the rough framing, and the existing waterproofing. We check for square, level, and plumb before the window ever leaves the truck. Fasteners are placed per manufacturer spec, never overdriven, and the frame is shimmed and set so the sashes glide without binding.

All perimeter joints get AAMA 812 low-expansion foam sealant, which fills the gap between frame and rough opening without pushing the jamb out of square. Once the unit is set, we run a water test on the sill and lower corners to verify drainage. Interior and exterior trim follow, and then a final operational check and cleanup. We take the old windows and all job debris with us.

Santa Clarita’s climate makes proper flashing and drainage critical. We get intense sun that bakes sealant, followed by rain that finds every flaw. We build our installations for that cycle. The same process applies to every VLX 500 we install, whether it’s a single slider in Saugus or a full three-track wall in a custom home off Placerita Canyon Road.

Frequently Asked Questions – VLX 500 Sliding Window

What is the lead time for the VLX 500 Sliding Window? Most VLX 500 orders through Juniper Windows Santa Clarita arrive within 3 to 5 weeks from order confirmation, depending on the track configuration, glass package, and finish you select. Custom sizes and laminated glass can add a week or two. Call (661) 523-0347 for current lead times on your specific configuration.

Does the VLX 500 qualify for energy tax credits? The VLX 500 can qualify for federal energy tax credits when ordered with an NFRC-rated Low-E glass package that meets the current Energy Star criteria for the Southern California climate zone. Qualification depends on the exact glazing and U-factor/SHGC ratings of your configuration, so we verify this before you order.

What warranty comes with the VLX 500 Sliding Window? ViewLux provides a manufacturer warranty covering the frame, hardware, and insulated glass units, and the installation labor warranty is provided by Juniper Windows Santa Clarita. The installation warranty covers workmanship issues like water leaks at the perimeter or failed sealant, provided the original installation was completed by our team.

Can I customize the size? Yes. The VLX 500 is available in custom sizes rather than stock dimensions only. We measure every opening on site, confirm rough opening dimensions, and order each unit to fit. Custom sizing means no oversized gaps stuffed with shims, which is where a lot of retrofit jobs go wrong. Call (661) 523-0347 to schedule a free measurement.

How do I maintain aluminum frames? Aluminum frames need periodic cleaning of the track and checking of the weep holes. Use mild soap and water on the frame, avoid abrasive cleaners, and clear debris from the bottom track every few months, especially after Santa Clarita’s windy season. The rollers and hardware need no lubrication. If a sash ever feels stiff, call us before forcing it: the issue is usually track debris or a roller issue, and both are cheap to fix if caught early.

Get a Quote – VLX 500 Sliding Window in Santa Clarita

If you’re considering the VLX 500 for your home, the next step is a free on-site measurement and written quote. Juniper Windows Santa Clarita will confirm your rough openings, discuss glass and finish options for your project, and give you a fixed price before any work begins. Call (661) 523-0347 to schedule your free estimate. We serve all of Santa Clarita, Valencia, Stevenson Ranch, Saugus, Newhall, Castaic, and Canyon Country.

Written by the team at Juniper Windows Santa Clarita, an authorized ViewLux installation partner serving Santa Clarita, CA.