New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Santa Clarita pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Impact Garage Doors: The Santa Clarita Owner’s Guide
We stock and install CGI-compatible impact garage doors across Santa Clarita, with most complete door replacements running between $2,800 and $6,500 installed depending on size, series, and track hardware. Most owners discover a problem the hard way: a door that suddenly binds on one side, a visible crack running from an impact point, or a panel that no longer seals flush against the frame after Santa Clarita’s summer heat cycles. If you’re seeing any of that, you’re in the right place. We carry the hinges, rollers, tracks, struts, and full door sections that CGI systems actually use, and we’ll match what you have now instead of forcing a universal part into a door that wasn’t built for universal parts.
Which CGI Models This Applies To
CGI impact garage doors are built around Miami-Dade and Florida Building Code testing, which means the hardware isn’t generic. The hinge spacing, strut profile, and track gauge on a CGI Sentinel or CGI Estate series door are specific to that line. If you have a CGI door in Santa Clarita, the fastest way to identify what you need is to check the inside face of the bottom panel or the top section: you’ll typically find a white or silver label with the series name, wind-load rating (usually WVZ or HVHZ), and a serial number. Take a photo of that label and text it to us before ordering anything online. The single biggest compatibility gotcha we see is with hinge and roller spacing; CGI doors built for hurricane zones often use 14-gauge end hinges and long-stem rollers with a 10-ball bearing setup, which a standard 2-inch universal roller won’t match. We stock OEM CGI parts and quality aftermarket equivalents that won’t leave you with a door that rattles loose in a year. We’re an independent Juniper Windows Santa Clarita service provider, not a CGI factory outlet, so our recommendation is based on what holds up in Santa Clarita’s heat and dry wind, not on moving whichever brand carries the highest markup.
Signs Your CGI Impact Garage Doors Is Failing
- Door binds or sticks on one side when opening. This usually isn’t a spring issue, it’s a strut or hinge that’s started to fail. CGI doors are heavier than standard residential doors, so when a strut loosens or a hinge pin wears, the door flexes unevenly and catches on the track. If you keep forcing it, you’ll oval out the roller stems and turn a $40 hinge replacement into a full roller and track job.
- Visible cracking around the panel edges or impact points. Impact-rated panels have a laminated aluminum skin over an insulated core, and once moisture gets between those layers through a crack, the panel starts delaminating. Santa Clarita’s dry heat doesn’t help; the expansion and contraction cycle widens small cracks fast.
- Rollers squeal or chatter when the door cycles. A squealing roller means the bearing is shot, and with a CGI door, the weight of the panel rides entirely on the roller stem. Replace the roller before the stem snaps, because a snapped stem lets the panel drop into the track at an angle and bends the track in the process.
- Top or bottom section feels soft or “spongy” when pressed from inside. That’s the core starting to break down, which happens when the laminated skin separates from the insulating foam. Impact doors lose their wind-resistance rating when the panel isn’t structurally coherent, even if the glass or skin still looks intact.
- Door won’t sit flush against the header or one side seal. This usually traces back to a worn top fixture or a sagging track, not the seal itself. With CGI’s heavier track systems, the top roller carrier wears first on the cable side. If you replace the weatherstrip without fixing the track, you’ll have the same gap in six weeks.
Replacement Cost & What’s Included
Here’s what CGI impact garage door replacement actually costs in Santa Clarita, installed:
- Full single-car impact door (8×7 or 9×7): $2,800 to $3,900
- Full double-car impact door (16×7 or 18×7): $4,200 to $6,500
- Individual panel replacement (single section): $380 to $850 depending on series and finish
- Hinge/roller/strut hardware kit for one door: $140 to $410
- Track repair or partial replacement: $300 to $750
Every price we give is a written line-item quote before any work starts. You’ll see the exact parts cost and the exact labor separated, and that number doesn’t change at the door. The range comes down to panel finish (flat white versus wood-grain or custom powder coat), wind-load rating, and whether we’re reusing your existing track or replacing it. All of our CGI door work is covered by the 365-Day Done Right Promise: 365 days, parts and labor, in writing. If something isn’t right after we finish, you call us and we come back, no charge and no argument.
DIY or Call Us?
Honestly, there’s one thing you should never touch on a CGI impact door: the spring system. Whether you have torsion springs on the bar across the top or extension springs running along the sides, both are under enough tension to seriously injure or kill you if they let go during adjustment. That is not dramatic phrasing, that is the reality of a door that weighs three to four times what a standard garage door weighs because of its impact-rated panel structure. Checking the door yourself is fine: look at the rollers, the hinges, the struts, and the panels. If you see a cracked strut or a wobbling roller, make a note of it. But even swapping a roller on an impact door is riskier than it looks, because the panel has to be braced against the track while the roller comes out, and a slip at the wrong angle can drop the section on you. If you’re in Canyon Country, Valencia, Saugus, Newhall, or anywhere else in the Santa Clarita Valley, call us at (661) 523-0347 and we’ll send a background-checked technician who does this specific hardware every week. The estimate is free, and you’ll get a fixed price in writing before anything gets touched.
FAQs
Most CGI impact doors in Santa Clarita last 15 to 20 years, with hardware like springs and rollers needing replacement every 5 to 8 years. The panels themselves hold up well here because we don’t have coastal salt spray, but the dry heat does shorten spring life slightly compared to more humid climates. Call (661) 523-0347 and we’ll inspect yours and tell you exactly what’s wearing and what has years left.
On an impact-rated door, a cracked or delaminated panel almost always needs replacement, not repair, because the panel’s performance depends on its internal lamination staying intact. Small dents in the aluminum skin can sometimes be addressed cosmetically, but if the structural integrity is compromised, a new panel is the honest call. We’ll look at photos or come out and tell you which situation you have, with a written price either way.
Most hardware replacements, like hinges, rollers, or struts, take 60 to 90 minutes on site. A full panel replacement is usually a two to three hour job. A complete door install is a day’s work. When you book with Juniper Windows Santa Clarita, you get a live arrival time you can track, before-and-after photos of the work, and a digital invoice you can pay from a link.
We stock the most common CGI hardware on our trucks, including hinges, rollers, struts, and track components for the Sentinel and Estate series. Anything uncommon, like a specific panel embossing or an older discontinued finish, we order direct and typically have it in hand within 3 to 5 business days. Call (661) 523-0347 with your door’s model label info and we’ll tell you same-day whether it’s a truck-stock item or a special order.
If your CGI impact garage door in Santa Clarita is giving you trouble, don’t wait until the door is stuck shut or hanging half-off the track. Call us at (661) 523-0347 for a free estimate, and we’ll give you a written price before any work begins. We’re Sean Mackey’s crew at Juniper Windows Santa Clarita, and we’ve been doing this long enough to know that a window that leaks air is just an expensive hole in your wall, and the same philosophy applies to a garage door that doesn’t seal or cycle right. Let’s do it right the first time.
Written by Sean Mackey, Owner, Juniper Windows Santa Clarita at Juniper Windows Santa Clarita, serving Santa Clarita and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Santa Clarita
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.